Hello! Welcome to visit Dongguan Yangdu Electronic Technology Co., Ltd! 中文版  /   English

产品中心

Industry

How to correct the installation position of ship switch?

Time: 2021-11-08 11:50:58  Views: 274

How to correct the equipment orientation of ship switch?

The orientation of equipment boat switch is also exquisite. Inappropriate equipment is likely to affect home days.

1. The height of ship type switchgear is generally 1.4m above the ground and at the same height, and the gap shall not exceed 5mm;

2. The ship switch near the door is generally on the right side of the door, but not on the back of the door;

3. For several ship switches side-by-side equipment or multi position switches, the orientation of the control electrical appliances shall correspond to the orientation of each switch function part, for example, the leftmost ship switch shall be used to control the leftmost electrical appliances; 4. The necessary ship type switch can be installed at the height of 0.5m above the wall desk and bedside table, which is conducive for users to control indoor electrical appliances without sailing;

5. The kitchen, toilet, roof and switchgear shall not be close to the water area as far as possible. If it is close, add switch and splash box

Lesson 2 equipment orientation rules of power socket:

1. The lower edge of general socket shall be 0.3m above the ground, and the equipment shall be at the same height, and the difference shall not exceed 5mm;

2. For each wall of living room and bedroom, the distance between two sockets shall not be higher than 2.5m, and at least one spare socket shall be equipped within 0.6m of wall corner;

3. The washing machine socket is 1.2m to 1.5m above the ground, and the best choice is the three pole socket with switch;

4. The refrigerator socket is 0.3m or 1.5m above the ground (depending on the orientation of the refrigerator), and a single three pole socket should be selected;

5. Split and wall mounted air conditioning sockets should be set 1.8m above the ground according to the orientation of the reserved hole of the outlet pipe, window air conditioning sockets can be set 1.4m above the ground next to the window, and cabinet air conditioner power sockets should be set 0.3m above the ground in the corresponding orientation.


Service hotline:
180-2511-9158
0769-86636109

Alibaba QR code

Wechat QR code

Copyright © Dongguan Yangdu Electronic Technology Co., Ltd ICP: YUE ICP NO.2021134657 Sitemap XML